Products

There are two doors at the bottom of the electric sludge storage bucket. The opening and closing of the door controls sludge discharge in the chamber. Each sector door is controlled by an electric push rod.

The Higher supporter and cake chute will be used when the feet of the filter press is not high enough at the customer's use site.

The Water Faucet is only for the open discharge type of the filter press, install one the side of the filter plate. According to the material, it can be divided into three types, polypropylene straight-through, nylon, and cork.

Accessory equipment for a filter press enhances its functionality and efficiency in solid-liquid separation processes. These additional components and systems complement the filter press operation and help optimize its performance. Here's an introduc

When the customer choose the membrane filter press with air squeezeing, and the use site of the filter press don’t have the Gas source, in this case, the Cold dryer machine will be used.

When the customer choose the membrane filter press with air squeezeing, and the use site of the filter press don’t have the Gas source, in this case, the air compressor will be used, and also the Gas storage tank will be used.

When the customer choose the membrane filter press with air squeezeing, and the use site of the filter press don’t have the Gas source, in this case, the air compressor will be used.

First, the main components of the pump are imported from abroad, and the pump adopts an infiltration-lubricated crankshaft rotating and frictionless ceramic plunger. Automatic pressure control, automatic unloading. Long service life and stable and re

Slurry pumps can be widely used in mines, power, metallurgy, coal, environmental protection and other industries to transport slurry containing abrasive solid particles. Such as metallurgical beneficiation plant slurry transportation, thermal power p

Metering pump: A machine that can measure and transport liquids, also called metering pumps, proportional pumps, because it is often used in various types of pharmaceutical additives, so it is also called dosing pump.

1. Wide pressure and flow range; 2. The wide range for the type and viscosity of the sludge; 3. Because the inertial force of the rotating parts in the pump is low, a high speed can be used;

Vertical structure, the same diameter of the inlet and outlet, and located on the same center line, can be installed in the pipeline like a valve, beautiful appearance, small footprint, low construction investment.